Arduino Beginner Kit UNO R3 Compatible (CH340)

This kit comes with Arduino UNO compatible board, UNO R3 Compatible with CH340. As most shields and libraries are based on UNO, it is the best board to learn the Arduino ecosystem.
It is fully compatible with the original Arduino UNO R3 (except for USB to UART chip – CH340), so all shields, examples, sketches for Arduino UNO R3 is applicable on this board.

About Arduino

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently support Mac OS X, Windows, and Linux).

---

 

Now, with this comprehensive beginner kit which includes the famous UNO R3 compatible as the main controller. All the applications and projects you want can be done with this set. This kit is suitable for:

• Engineering students: Controller and Electronics are must-have topics in all engineering courses, Electronics, Mechanical, or even Civil Engineering. This kit is perfect for you to understand the basics of controllers, electronics, sensors, actuators, and programming.
• Teachers: Perfect for student-teacher projects.
• Electronic enthusiasts: Kickstart your next project utilizing all the components in this kit.
• Robot Builders: All the sensors and actuators are suitable for robotics.
• Software Engineers: Arduino will be an excellent platform for establishing interfaces on the computer to receive data from the outside world and for communication applications.

---

Features:

• Comes with UNO R3 Compatible (CH340) board
• Pack in a two layers plastic case, suitable for long usage and tidy storage
• Includes various types of sensors, and actuators (motors, LEDs, buzzer)
• Perfect for learning Arduino ecosystem, electronics, and programming
• You only need a computer to get started
• Power everything from your USB port which is needed for program loading in any case.

---

Packing List:

 

• 1 x UNO R3 CH340 (Arduino UNO R3 compatible) board
• 1 x USB Type B Cable, to power and program loading into UNO R3 CH340 board, 40cm length
• 1 x 30 pcs Jumper Cable Male to Male
• 1 x 10 ways Dupont Male to Female wire
• 1 x Large Size Breadboard, 830 holes
• 1 x Four segments 7 Segment Display
• 1 x Single 7-Segment Display
• 1 x 8 x 8 Dot matrix module
• 1 x Parallel LCD 16 * 2 Character
• 1 x UNL2003 Driver Board
• 5 x 5mm Red LED
• 5 x 5mm Green LED
• 5 x 5mm Yellow LED
• 1 x 28BJJ Unipolar Stepper Motor
• 1 x SG90 Servo Motor
• 1 x 9V Battery Clip Arduino Compatible
• 5 x 220R Resistor
• 5 x 10K Resistor
• 5 x 1K Resistor
• 1 x 10K potentiometer/variable resistor
• 1 x Male Header 1 x 40, for solder 2×16 Character LCD
• 1 x Active Buzzer
• 1 x Passive Buzzer
• 4 x Yellow Cap Push Button
• 1 x LM35 Temperature sensor
• 1 x Tilt sensor
• 1 x Flame sensor
• 1 x Water sensor
• 2 x 5mm LDR
• 1 x IR sensor (LED shape)
• 1 x Infrared Remote Control Receiver
• 1 x IR Remote (battery CR2025 is included)
• 1 x 74HC595N IC, Serial to Parallel IC for Output pin expansion
• 1 x 4 x 4 Key button
• 1 X RFID RC522 Mifare Module
• 1 X RFID Mifare keychain
• 1 X RFID Mifare card
• 1 x Joystick module
• 1 x Sound module
• 1 x Relay module
• 1 x 9V battery snap to DC Barrel Jack (9V battery is NOT included)
• 1 x RTC module (coin cell battery is included)
• 1 x Small SMD parts case

---

Documents & Tutorials:

• Download Arduino IDE
• Official Arduino Site
• CH34X driver (Please ensure the Maker UNO is plugged into computer USB port during driver installation)
  • Windows (V3.5 Mar2019)
  • Mac OS (V1.5 Mar2019)
  • Linux (V1.5 Mar2019) (Normally is readily installed)
  • CH34X Driver – Get the latest driver from the factory